Balatron B212.G2 - Digital Wheel Balancer

B212.G2.40.KS.QLS

B212 Nano
The new generation of the ultra compacts.
With an ultra compact design, B212 offers the basic features for a safe and accurate wheel balancing. Space requirements are set to a minimum with a possibility to include all special features and options to balance any type of wheel to perfection.

User friendly technology. Ready for the future !

Based on an modern 16-bit microprocessor, accuracy, speed and special functions (SPLIT, ALU-SE, MARS, AFC, OPT, DUAL-OP, ASF) are all available (see table for availability on selected models).
The 3D control panel allows to work intuitively since the beginning. Few push-buttons let you choose all functions most easily.
Flash memory technology allows to upgrade software in seconds, by just connecting the balancer to a PC. This feature lets you take advantage of our continuous technical developments and make sure your product is never outdated!

Minimized space requirements
A compact base for an elegant and innovative console, with 6 compartments for weights and tools and built-in place for 3 cones. Flanges can be placed laterally on the wheel balancer: 4 flange holders are provided.
A modern design that cares for space requirements first.

Precision mechanics
The heart of the balancer is built around the VQI 3-sensor system, a FASEP exclusive design, and with IFS system (integrated-flange shaft) for maximum centering accuracy.
It also comes with the new shaft 2003, allowing larger tires and rims and designed to work easily on wheels where adhesive weights are required, with a larger access to the inside of the rim, more then any other competitor.

All you need to know

Technical Data
Languages
Functions
Optional functions
Standard accessories
Optional accessories
Forum

Shipping and installing

Dimensions
Shipping data

Tech news

Shaft 2003
Basement 2003

Tech support

Upgrades
Support
Knowledge base

Special B212.G2

Catalogues
Manuals
Spare Parts Tables

Inventory..

Versions..

Technical data
Power source	220V 50-60Hz 1Ph
Motor power	50W
Absorbed power	60 Watt
Balancing speed	98 RPM
Rim Diameter	8" (200 mm) - 26" (650 mm)
Rim Diameter (alu-s)	8" - 23"
Wheel Diameter (max) with wheel guard without wheelguard	34" (850 mm) 49" (1250 mm)
Wheel width (max) with wheel guard	16" (415 mm)
Wheel weight (max)	75 Kg (166 Lbs)
Measuring time	4 - 15 s.
Precision	1 gr. (0.05 oz)
Noise	< 70 dB (A)

Functions
	B212.G2	B221.G2	B306.G2	B331.G2
Hardware features
Weight compartments	6	6+1	7+1	9
Cone compartments	yes	yes	no	yes
Flange supports	4	4	6	4
Wheel data input - IN Automatic input of distance and diameter	opt	opt	opt	opt
Wheel data input - OUT Automatic input of width	no	no	opt	opt
Foot lock pedal to ease locking-unlocking of flanges and application of weights	yes	yes	yes	yes
Software functions (standard = Level 1)
Unit of measure mm / inches (user setup)	yes	yes	yes	yes
START-STOP Automatic	yes	yes	yes	yes
Display step 1 / 5 gr (user setup)	yes	yes	yes	yes
Display cut-off 1..9 gr (user setup)	yes	yes	yes	yes
Stop-on-top at the end of measuring run, wheel is stopped with point of application of weight placed at 12 o'clock	yes	yes	yes	yes
Autodiagnostic a great number of malfunctions or user mistakes in procedure are detected	yes	yes	yes	yes
Autocalibration sensor calibration can be easily performed by the user	yes	yes	yes	yes
SPLIT to divide the balance weight and place them in a the desired position (usually hidden behind the spokes, non-visible)	yes	yes	yes	yes
Statistics total number of spins, the % of success, the % for each diameter	yes	yes	yes	yes
FCC Fast Calibration Check	yes	yes	yes	yes
ALU-S allows to measure and enter the exact position of adhesive weights to be placed on alloy rims	yes	yes	yes	yes
ALU-SE ALU-S Electronic allows to enter measurements automatically and find automatically the exact position of adhesive weights to be placed on alloy rims	opt	opt	opt	opt
MARS Automatic Minimization of Residual Static Unbalance allows to reduce the static unbalance left, due to rounding when using weights multiple of 5 grams.	yes	yes	yes	yes
Software functions (Level 2)
Optimization Tyre Matching (LEVEL2) Static (tyre rotation)	opt	yes	yes	yes
AFC Automatic Flange Calibration (LEVEL2) allows to use even non-balanced flanges (dirty, worn, etc.)	opt	yes	yes	yes
DUAL-OP Double Operator (LEVEL2) Two users can share the unit at the same time independently	opt	yes	yes	yes
Software functions (Level 3)
ASF ALU Special Functions (LEVEL3) Allows to place adhesive weights at 6 o'clock and other useful functions.	opt	opt	opt	yes
APS Automatic Positioning System (LEVEL3) Allows to move wheel automatically to inside/outside position for application of the balancing weight.	opt	opt	opt	yes
FAST Fast balancing mode (LEVEL3) Allows to measure wheel unbalance in half time (for when you have peak-hours time/periods).	opt	opt	opt	yes
AUTOSELECT (LEVEL3) Automatic selection of balancing mode (dynamic, alu-s1, alu-s2) by simply entering the wheel dimensions	opt	opt	opt	yes

Dimensions

Packing (mm)
	A	B	C
B212.G2	900	500	1120
Weight (kg)
	Lordo	Netto
B212.G2	60	49
Dimensions (mm)
	L	P	H
B212.G2	1110	510	990

Optional functions and accessories
Wheelguard	wheel cover is optional as balancer runs at low speed
ALU-SE	Allows to measure and enter the exact position of adhesive weight automatically